Dekker Vmax
Maximum payback: By eliminating the use of water completely, Vmax systems offer you a quick payback when replacing existing water-sealed liquidring vacuum pumps. Add up all the benefits - increased productivity, maximum efficiency, lowest maintenance - and you'll find Vmax is the best investment you can make in a vacuum pump system.
Maximum productivity: Built for the toughest applications, Vmax liquidring vacuum pump systems are designed to operate continuously under the most difficult conditions, even when saturated vapors or soft particles are present in the inlet gas stream. Unlike rotary vane and rotary screw vacuum pumps, the Vmax system can tolerate accidental carry-over of soft solids without damaging the internal pump parts.
Maximum reliability: Flanged motor mount design is standard for most units up to 20 HP and eliminates coupling misalignment problems by flange mounting to NEMA C-face motors. This important feature prevents damage to the shaft seals and bearings and eliminate downtime for routine alignment and costly repair.
Maximum savings on maintenance: Under normal conditions you only change the seal fluid after 10,000 or more hours of operation. The Vmaxol seal fluid is not used as a lubricant which explains why the change interval is not critical, as is the case with other types of pumps.
Maximum noise reduction: Vmax systems are exceptionally quiet in operation, which makes these systems more desirable in today's workplace.
Maximum separator efficiency: Featuring five stages of air/oil separation, DVT's new exclusive DX-5™ air/oil separator ensures the cleanest environment.
Maximum temperature control: A high efficiency air-cooled heat exchanger together with an optional automatic temperature control valve allows the Vmax system to operate a t ambient temperatures as high as 110°F while at the same time ensuring proper operating temperatures. Vmax systems can operate over the full vacuum range without overheating.